TCS Tooling

• Clamp Connector Debris Covers
  • Fit all size TCS and TC2 Inboard Hubs
  • Intended for surface use, but subsea capable over short periods
  • Polypropylene construction resistant to shocks and weather
  • If needed, operable with T-Handle
  • Stainless fasteners
  • Vent Holes
• Hub Cleaning Tool
  • Polymer nose cone aligns tool into bore of hub without risking damage to the gasket prep surface.
  • Scotch Bright scouring strips are clamped between components of tool; fasteners are positioned to prevent accidental dropping down hole.
  • ROV Handle per API 17H, ¾” braced rod.
  • Available for TC2 and TCS Assemblies
• Draw Down-Jack Up Tool
  • Easily-operable tool for:
    • Drawing down and landing connectors that have become accidentally wedged during normal installation
    • Jacking up connectors to facilitate subsea gasket change operations
  • Contingency tool: not required to be deployed for normal connector landing or alignment.
  • API 17H Type A Dual Port Hot Stab ROV Interface
  • Actuated via 1/4-turn ROV Operable Ball Valve (36 lb-ft max torque)
• Clamp Connector Gasket Replacement Tools
  • Sled-Based design that is configured for gasket installation or retrieval.
  • Sled is inserted via ROV into the outboard Alignment Funnel window of the connector
  • Mechanical Jack is actuated via ROV API 17H hot stab that operates a hydraulic motor.
  • TC2 Gasket Replacement Stab also available
• TC2 Secondary Override Tool
• In the event of the 2” horizontal connector unlock operation fails, the override tool is designed to unlock the connector through means of hydraulic cylinders via ROV
• In the event of the 2” horizontal connector unlock operation fails, the override tool is designed to unlock the connector through means of hydraulic cylinders via ROV
• Override tool is sent subsea via downline and guided by ROV over the TC2 connector

• Print